CW laser 335 nm
UV-FN-335 | CW UV solid state laser
All solid state UV laser. Features: high output power stability, good beam profile, ultra compact, long lifetime, low cost and easy operating. Applications: laser medical treatment, scientific experiment, optical instrument, etc.
Wavelength: 335 ± 1nm
Operating mode: CW
Output power: 1, 2, ..., 60 mW
Power stability: < 5%, < 3%
(rms, 4 hours)
Transverse mode: ~ TEM00
M² factor: < 2.0
Beam diameter: ~ 1.5 mm (1/e²)
Beam divergence: < 2.5 mrad (full angle)
Polarization ratio: > 50:1 (horizontal)
Pointing stability: < 0.05 mrad
Beam height: 27.4 mm
Operating temperature: 10 ~ 35 °C
Warm-up time: < 10 min
Modualtion frequency: 1 Hz - 1 kHz
1 kHz - 10 kHz
10 kHz - 30 kHz
Modualtion method: TTL
(analog as option)
Power supply: AC 90 ~ 264 V
Warranty: 1 Year
Note: The laser head needs to be used on a heat sink with good heat dissipation.
Operating mode: CW
Output power: 1, 2, ..., 60 mW
Power stability: < 5%, < 3%
(rms, 4 hours)
Transverse mode: ~ TEM00
M² factor: < 2.0
Beam diameter: ~ 1.5 mm (1/e²)
Beam divergence: < 2.5 mrad (full angle)
Polarization ratio: > 50:1 (horizontal)
Pointing stability: < 0.05 mrad
Beam height: 27.4 mm
Operating temperature: 10 ~ 35 °C
Warm-up time: < 10 min
Modualtion frequency: 1 Hz - 1 kHz
1 kHz - 10 kHz
10 kHz - 30 kHz
Modualtion method: TTL
(analog as option)
Power supply: AC 90 ~ 264 V
Warranty: 1 Year
Note: The laser head needs to be used on a heat sink with good heat dissipation.
Q-switch laser 335 nm
EO-XS-335 | EOM q-switched UV DPSS laser
All solid state EOM Q-switched laser at 335nm has the features of high peak power, high repetition rate, and short pulse duration, which is widely used inmarking, carving, measure, research and so on.
Wavelength: 335 ± 1nm
Q-switch mode: electro-optic
Output power: 1 ~ 100 mW
Power stability: < 3%, < 5% (4 hours)
Pulse energy: 1 ~ 10 µJ
Q-switch mode: electro-optic
Output power: 1 ~ 100 mW
Power stability: < 3%, < 5% (4 hours)
Pulse energy: 1 ~ 10 µJ
Pulse duration: ~ 4 ns (10µJ @10 kHz)
Peak power: 1 ~ 2.5 kW
Repetition rate: 10 kHz
Beam diameter: ~ 2 x 4 mm (1/e²)
Beam divergence: < 3 mrad (full angle)
Beam height: 101 mm
Beam divergence: < 3 mrad (full angle)
Beam height: 101 mm
Cooling method: air
Operating temperature: 15 ~ 35 °C
Warm-up time: < 10 min
Power supply: AC 220V
Expected lifetime: 10000 hours
Warranty: 1 Year
Warm-up time: < 10 min
Power supply: AC 220V
Expected lifetime: 10000 hours
Warranty: 1 Year